
Servo or GM Mount
Wheels

These wheels are custom manufactured to fit
Futaba servo splines or our GM series motor shafts. No more rubberbands, these
wheels have over injected tires that have better traction than the Tigerbotics wheel rubberbands and they don't crumble after a few uses. Another added feature is the custom built in encoder disc for quadrature encodining and is made to work directly with the WheelWatcher II from Nubotics.
The wheels measure 2.7" in diameter and come in your coice of Red, Blue, Yellow, or Black.
These wheels are RoHS complient.
Back Ordered
Price $6.00
per pair
|
Original Tigerbotics Wheels
These are the Tigerbotics wheels that were originally designed for Portland's MarkIII Sumobot as suggested by Dan Gates,
they are injection molded from ABS plastic with the Servo spline built in to provide a
rugged drive system.
Tigerbotics took the idea and was able to manufacture them for robot enthusiasts, they quickly became the wheel of choice for small hobby robots.
The one downfall to these wheels is the need for a rubberband as the tire. This made it dificult to put on and crumbled after about one year.
There is a limited stock and we only carry the Servo hub style.
Price $6.95
per pair
|

Original Johnny
Robot Tracks
These are the official Johnny Robot tank tracks,
they are injection molded from ABS plastic to provide a
rugged drive system.
Johnny Robot treads are nearly impossible to derail because
of their design. Each set consists of two drive cogs, two
idler cogs and two 20 link tracks which make a 5" oval.
You can purchase extra links and make them longer if desired.
Price $27.99
per set
|

Color Johnny
Robot Tracks

You can customize your robot with these color
tank treads from Johnny Robot. Same as described above,
but the selection menu allows for color and drive cog type.
All treads come with black cogs.
Price $29.99
per set
|